Hub, Axle and A-Frame Cracking

Manufacturer: Huss RidesDocument Type: Gov NoticeAgency: UK National Association for Leisure Industry Certification (NAFLIC)Effective Date: June 21, 2017 huss-rides-gov-notice-1727.pdfNote: Technical notice prepared and provided by NAFLIC.Rides and Devices: Pirate Ship

Date Published: 
07/13/2017 - 22:13

Main Tower Mast Cracking

Manufacturer: Huss RidesDocument Type: Gov NoticeAgency: UK National Association for Leisure Industry Certification (NAFLIC)Effective Date: June 21, 2017 huss-rides-gov-notice-1728.pdfNote: A technical bulletin prepared and provided by NAFLIC.Rides and Devices: Top Spin

Date Published: 
07/13/2017 - 22:17

Capstan Shaft Cracking

Manufacturer: PWS Rides Ltd.Document Type: Gov NoticeAgency: UK National Association for Leisure Industry Certification (NAFLIC)Effective Date: June 21, 2017 pws-rides-ltd-gov-notice-1729.pdfNote: Technical bulletin prepared and supplied by NAFLIC.Rides and Devices: 

Date Published: 
07/13/2017 - 22:35

Documentation Requirements for Annual Inspections

Document Type: Gov NoticeAgency: UK National Association for Leisure Industry Certification (NAFLIC)Effective Date: June 21, 2017 gov-notice-1730.pdfNote: NAFLIC reminds operators of documentation requirements for operators in the UK.

Date Published: 
07/13/2017 - 22:51

Electrical Safety Alert

Document Type: Gov NoticeAgency: Pennsylvania Department of AgricultureEffective Date: May 19, 2017 gov-notice-1725.pdfNote: 

Date Published: 
05/22/2017 - 09:00

Five things ride controllers should know about Non-Destructive Testing (NDT)

Non-destructive testing (NDT) is the process of testing for defects without affecting the condition of the component. In other words, once the test is complete the component can still be used! It is a critical part of inspection because defects may start inside components or be so small they cannot be seen without special tests.  Most rides require it each year but do you know how the process should work during inspection? Here’s five things you should know if you are responsible for a ride.
1. Why does my ride need NDT?

Date Published: 
05/10/2017 - 03:44

Paperwork for Second Hand Rides

Paperwork to check when buying a second hand ride
Before you find ‘the one’, you’ll probably spend hours comparing and researching different rides until the breakthrough moment when you find the ride you want to buy.
But before you part with hard-earned cash, be sure to check the following paperwork is in order.
Pre-use inspection reports

Date Published: 
04/18/2017 - 09:42

Demand for inspection, getting the right balance

The demand for ADIPS inspection – getting the balance right
With an increase in rides and a decrease in inspectors over recent years it’s not too surprising that the Amusement Device Safety Council (ADSC) are looking closely at ways to ensure there are enough competent inspectors to carry out examinations of travelling fairground rides.

Date Published: 
04/18/2017 - 10:10

Pages

Subscribe to Saferparks RSS